SP514 Datasheet, PDF (1/20 Pages) Sipex Corporation – WAN Multi-Mode Serial Transceiver

®
SP514
WAN Multi-Mode Serial Transceiver
■ +5V Only
■ Seven (7) Drivers and Seven (7) Receivers
■ Driver and Receiver Tri-State Control
■ Reduced V.35 Termination Network
■ Pin Compatible with the SP504
■ Improved Propagation Delays
■ Software Selectable Interface Modes:
-RS-232E (V.28)
-RS-422A (V.11, X.21)
-RS-449 (V.11 & V.10)
-RS-485
-V.35
-EIA-530 (V.11 & V.10)
-EIA-530A (V.11 & V.10)
-V.36
DESCRIPTION
The SP514 is a single chip devices that supports eight (8) physical serial interface standards
for Wide Area Network connectivity. The product is fabricated using a low power BiCMOS
process technology, and incorporates a Sipex patented (5,306,954) charge pump allowing
+5V only operation. The SP514 is 100% compatible with the SP504 multi-protocol serial
transceiver IC. All applications using the SP504 can also use the SP514. The SP514 has
slightly improved AC performance for its V.35 and V.11 drivers and receivers.
EIA-530
V.35
WAN
Rev. 3/05/04
SP514 Multi–Mode Serial Transceiver
1
© Copyright 2004 Sipex Corporation