SP507 Datasheet, PDF (1/28 Pages) Sipex Corporation – +5V, Single Chip WAN Multi-Mode Serial Transceiver

®
SP507
+5V, Single Chip WAN Multi-Mode Serial Transceiver
■ Interface Modes Supported:
✓ RS-232 (V.28)
✓ X.21/RS-422 (V.11)
✓ EIA-530 (V.10 & V.11) ✓ EIA-530A (V.10 & V.11)
✓ RS-449 (V.10 & V.11) ✓ V.35 (V.35 & V.28)
■ Software Selectable Protocols
■ Highest Differential Transmission Rates
available at over 20Mbps
■ +5V Only Operation
■ Seven (7) Drivers and Seven (7) Receivers
■ Driver and Receiver Tri-state Control
■ Internal Transceiver Termination Resistors for
V.11 and V.35 Protocols
■ Improved ESD Tolerance for Analog I/Os
■ Compliant to NET1/2 and TBR2 Physical Layer
Requirements
■ Used in WAN Serial Ports in Routers Switches,
DSU/CSU's and other Access Devices
■ Available in 132-Lead Small Scale Ball Grid
Array and 80-Lead MQFP
DESCRIPTION
The SP507 is a monolithic IC that supports seven (7) popular serial interface standards for
DTE/DCE connectivity. The seven (7) drivers and seven (7) receivers transmit and receive
signals at over 20Mbps. The SP507 requires no additional external components for compliant
operation for all seven (7) modes of operation. All necessary termination is integrated within
the SP507 and is switchable when V.35 drivers, V.35 receivers, and V.11 receivers are used.
The SP507 can operate as either a DTE or DCE.
Additional features include a latch enable pin with the driver and receiver address decoder.
Tri-state ability for the driver and receiver outputs is controlled by supplying a 3-bit word into
the address decoder. Four (4) drivers and four (4) receivers in the SP507 include separate
enable pins for added convenience.
EIA-530
V.35
WAN
Rev: A Date:1/27/04
SP507 Multi–Mode Serial Transceiver
1
© Copyright 2004 Sipex Corporation