SP3483 Datasheet, PDF (1/9 Pages) Sipex Corporation – +3.3V Low Power Slew Rate Limited Half-Duplex RS-485 Transceiver

®
SP3483
+3.3V Low Power Slew Rate Limited
Half-Duplex RS-485 Transceiver
s RS-485 and RS-422 Transceiver
s Operates from a single +3.3V supply
s Interoperable with +5.0V logic
s Driver/Receiver Enable
s Low Power Shutdown Mode
s -7V to +12V Common-Mode Input
Voltage Range
s Allows up to 32 transceivers on
the serial bus
s Compatibility with the industry
standard 75176 pinout
s Driver Output Short-Circuit Protection
s Slew Rate Limited Driver for Low EMI
(SP3483)
DESCRIPTION
The SP3483 device is part of a family of +3.3V low power half-duplex transceivers that meet
the specifications of the RS-485 and RS-422 serial protocols. This device is pin-to-pin
compatible with the Sipex SP483 device as well as popular industry standards. The SP3483
features Sipex's BiCMOS process, allowing low power operation without sacrificing
performance. The SP3483 is internally slew rate limited to reduce EMI and can meet the
requirements of RS-485 and RS-422 up to 250kbps.
SP3483 DS/04
RO 1
RE 2
DE 3
DI 4
R
D
8 Vcc
7B
6A
5 GND
SP3483
SP3483 Low Power Slew Rate Limited Half-Duplex RS485 Transceivers
1
© Copyright 2000 Sipex Corporation