SP3222EU Datasheet, PDF (1/20 Pages) Sipex Corporation – 3.3V, 1000 Kbps RS-232 Transceivers

®
SP3222EU/3232EU
3.3V, 1000 Kbps RS-232 Transceivers
■ Meets true EIA/TIA-232-F Standards
from a +3.0V to +5.5V power supply
■ Interoperable with EIA/TIA - 232 and
adheres to EIA/TIA - 562 down to a +2.7V
power source
■ 1µA Low-Power Shutdown with Receivers
Active (SP3222EU)
■ Enhanced ESD Specifications:
±15kV Human Body Model
±15kV IEC1000-4-2 Air Discharge
±8kV IEC1000-4-2 Contact Discharge
■ 1000 kbps Minimum Transmission Rate
■ Ideal for Handheld, Battery Operated
Applications
DESCRIPTION
The SP3222EU and the SP3232EU are 2 driver, 2 receiver RS-232 transceiver solutions
intended for portable or hand-held applications such as notebook or palmtop computers.
Their data transmission rate of 1000 kbps meets the demands of high speed RS-232
applications. Both ICs have a high-efficiency, charge-pump power supply that requires
only 0.1µF capacitors in 3.3V operation. This charge pump allows the SP3222EU and the
3232EU to deliver true RS-232 performance from a single power supply ranging from
+3.0V to +5.5V. The ESD tolerance of the SP3222EU/3232EU devices are over ±15kV
for both Human Body Model and IEC1000-4-2 Air discharge test methods.
The SP3222EU device has a low-power shutdown mode where the devices' driver
outputs and charge pumps are disabled. During shutdown, the supply current falls to less
than 1uA.
SELECTION TABLE
MODEL Power Supplies
SP3222EU
SP3232EU
+3.0V to +5.5V
+3.0V to +5.5V
RS-232
Drivers
2
2
RS-232
External
Receivers Components
2
4
2
4
Shutdown
Yes
No
TTL No. of
3-State Pins
Yes 18, 20
No
16
Rev. A Date:12/11/03
SP3222EU/3232EU 3.3V, 1000Kbps RS-232 Transceivers
1
© Copyright 2003 Sipex Corporation