SI826X-EVB Datasheet, PDF (7/18 Pages) Silicon image – Si826X LED EMULATOR INPUT ISODRIVER EVALUATION BOARD USER’S GUIDE

Si826x-EVB
4. Open Loop POL Evaluation Board
The power and jumper connections descriptions are summarized here:
P1
P2
JP1
JP2
JP3
JP4
JP5
JP6
External input signal connections to drive the LED Emulator.
External output signal and VDD connections.
Jumper when installed bypasses the external bootstrap circuitry.
Jumper when installed used to accommodate common-anode drive.
Jumper when installed can be used to enable the fast reverse recovery diode.
Jumper when installed can be used to add additional load to output.
Jumper when installed can be used to bypass the output gate resistor.
Jumper when installed used to accommodate common-cathode drive.
4.1. Voltage and Current Sense Test Points
The Si826x evaluation board has several test points. These test points correspond to the respective pins on the
Si826x integrated circuits as well as other useful inspection points. See Figures 7 through 10 for a silkscreen
overview. See schematics in Figures 11 through 14 for more details as well.
Figure 7. Si826x DIP8 Evaluation Board Silkscreen
Figure 8. Si826x SOIC8 Evaluation Board Silkscreen
Rev. 0.1
7