EFM32G842 Datasheet, PDF (56/70 Pages) Silicon Laboratories – Wake-up Interrupt Controller

...the world's most energy friendly microcontrollers
5. Dimension 'D1' and 'E1' do not include mold protrusions. Allowable protrusion is 0.25mm per side.
'D1' and 'E1' are maximum plastic body size dimension including mold mismatch. Dimension 'D1' and
'E1' shall be determined at datum plane 'H'.
6. Detail of Pin 1 indicatifier are option all but must be located within the zone indicated.
7. Dimension 'b' does not include dambar protrusion. Allowable dambar protrusion shall not cause the
lead width to exceed the maximum 'b' dimension by more than 0.08 mm. Dambar can not be located
on the lower radius or the foot. Minimum space between protrusion and an adjacent lead is 0.07 mm
8. Exact shape of each corner is optional.
9. These dimension apply to the flat section of the lead between 0.10 mm and 0.25 mm from the lead tip.
10.All dimensions are in millimeters.
Table 4.4. QFP64 (Dimensions in mm)
DIM
MIN
NOM
MAX
DIM
MIN
NOM
MAX
A
-
1.10
1.20
L1
-
A1
0.05
-
0.15
R1
0.08
-
-
A2
0.95
1.00
1.05
R2
0.08
-
0.20
b
0.17
0.22
0.27
S
0.20
-
-
b1
0.17
0.20
0.23
θ
0°
3.5°
7°
c
0.09
-
0.20
θ1
0°
-
-
C1
0.09
-
0.16
θ2
11°
12°
13°
D
12.0 BSC
θ3
11°
12°
13°
D1
10.0 BSC
e
0.50 BSC
E
12.0 BSC
E1
10.0 BSC
L
0.45
0.60
0.75
The TQFP64 Package is 10 by 10 mm in size and has a 0.5 mm pin pitch.
The TQFP64 Package uses Nickel-Palladium-Gold preplated leadframe.
All EFM32 packages are RoHS compliant and free of Bromine (Br) and Antimony (Sb).
For additional Quality and Environmental information, please see:
http://www.silabs.com/support/quality/pages/default.aspx
2015-05-22 - EFM32G842FXX - d0070_Rev1.90
56
www.silabs.com