EFM32G222 Datasheet, PDF (53/68 Pages) Silicon Laboratories – Wake-up Interrupt Controller

4.4 TQFP48 Package
Figure 4.2. TQFP48
...the world's most energy friendly microcontrollers
Note:
1. Dimensions and tolerance per ASME Y14.5M-1994
2. Control dimension: Millimeter.
3. Datum plane AB is located at bottom of lead and is coincident with the lead where the lead exists
from the plastic body at the bottom of the parting line.
4. Datums T, U and Z to be determined at datum plane AB.
5. Dimensions S and V to be determined at seating plane AC.
6. Dimensions A and B do not include mold protrusion. Allowable protrusion is 0.250 per side. Dimen-
sions A and B do include mold mismatch and are determined at datum AB.
7. Dimension D does not include dambar protrusion. Dambar protrusion shall not cause the D dimension
to exceed 0.350.
8. Minimum solder plate thickness shall be 0.0076.
9. Exact shape of each corner is optional.
Table 4.4. QFP48 (Dimensions in mm)
DIM
MIN
NOM
MAX
DIM
MIN
NOM
MAX
A
-
7.000 BSC
-
M
-
12DEG REF
-
A1
-
3.500 BSC
-
N
0.090
-
0.160
B
-
7.000 BSC
-
P
-
0.250 BSC
-
B1
-
3.500 BSC
-
R
0.150
-
0.250
C
1.000
-
1.200
S
-
9.000 BSC
-
2015-05-22 - EFM32G222FXX - d0033_Rev1.90
53
www.silabs.com