SI1141-M01 Datasheet, PDF (50/79 Pages) Silicon Laboratories – High reflectance sensitivity

Si1141/42/43-M01
ALS_VIS_DATA1: ALS_VIS_DATA Data Word High Byte @ 0x23
Bit
Name
Type
7
6
5
4
3
2
1
0
ALS_VIS_DATA[15:8]
RW
Reset value = 0000 0000
Bit
Name
Function
7:0 ALS_VIS_DATA[15:8] ALS VIS Data MSB. Once autonomous measurements have started, this reg-
ister must be read after INT has asserted but before the next measurement is
made. Refer to AN498 "Designer's Guide" Section 5.6.2 "Host Interrupt
Latency."
ALS_IR_DATA0: ALS_IR_DATA Data Word Low Byte@ 0x24
Bit
7
6
5
4
3
2
1
0
Name
ALS_IR_DATA[7:0]
Type
RW
Reset value = 0000 0000
Bit
Name
Function
7:0 ALS_IR_DATA[7:0] ALS IR Data LSB. Once autonomous measurements have started, this register
must be read after INT has asserted but before the next measurement is made.
Refer to AN498 "Designer's Guide" Section 5.6.2 "Host Interrupt Latency."
ALS_IR_DATA1: ALS_IR_DATA Data Word High Byte @ 0x25
Bit
7
6
5
4
3
2
1
0
Name
ALS_IR_DATA[15:8]
Type
RW
Reset value = 0000 0000
Bit
Name
Function
7:0 ALS_IR_DATA[15:8] ALS IR Data MSB. Once autonomous measurements have started, this register
must be read after INT has asserted but before the next measurement is made.
Refer to AN498 "Designer's Guide" Section 5.6.2 "Host Interrupt Latency."
50
Rev. 1.1