UG163 Datasheet, PDF (5/25 Pages) Silicon Laboratories – Si1133/Si1153 Optical Sensor Evaluation Board Users Guide

UG163: Si1133/Si1153 Optical Sensor Evaluation Board User's Guide
Board Setup and Use
2.3 Installation and Basic Use of the Optical Programmer's Toolkit
1. Download and install Rev 3.2 or higher of the Silicon Labs Optical Programmers toolkit.
2. Once installed, launch the application using: Start >> All Programs >> Silicon Labs >> Si114x Optical Sensor >> Launcher
3. Select UV and ALS Demo, and then click on the UV_ALS_DEMO button, as shown in the figures below.
Figure 2.2. Starting the Programmer's Toolkit and UV/ALS Demo
silabs.com | Smart. Connected. Energy-friendly.
Rev. 0.1 | 4