M-BUS-EK Datasheet, PDF (5/20 Pages) Silicon Laboratories – AC to DC power adapter

Wireless M-Bus-EK
5. Install Wireless Meter-Bus Software
Download the Wireless M-Bus demo software from the Silicon Labs web site:
www.silabs.com/wirelessmbus
The Wireless Meter-Bus demo requires Windows 2000^®, XP^®, Server2003^®, Vista^®, or Windows 7^®. Download
the software, unzip it, and run the installer executable.
6. Install USBXpress Driver
The Wireless M-Bus PC software uses the USBXpress API and requires the USBXpress driver. Download and
install the USBXpress driver before connecting the Wireless M-Bus board to the computer via USB. There is no
cause for concern if you have already connected the Wireless M-Bus demo board to the PC. Disconnect the
Wireless M-Bus demo board, and proceed with the USBXpress installation.
Download and install the USBXpress development kit for windows from the Silicon Labs website:
www.silabs.com/USBxpress
Unzip the file and run the executable program. When prompted, check the “Install USBXpress Drivers” checkbox to
install the USBXpress Drivers immediately. If you miss this step, the USBXpress driver can be installed later by
running the driver installer. The following path is the USBXpress driver installer default location:
C:\SiLabs\MCU\USBXpress\Driver\USBXpressInstaller.exe
Configure the shorting blocks before connecting the USB cable as explained in “7. Hardware Setup”.
Rev. 0.1
5