SI501-EVB Datasheet, PDF (4/19 Pages) Silicon Laboratories – USB plug-in board that allows for evaluation of the Si50x family of CMEMS oscillators.

Si501/2/3/4-EVB
4. Default frequency clock of 100 MHz should now be output from SMA "J1" circled below.
5. To change the output frequency, enter a desired frequency in "New Frequency" field and press "Set
Frequency" button.
6. The Si504 can be placed in any supported Run Mode or Power/Jitter mode by pressing the appropriate
radio buttons. The GUI will automatically update the device.
7. The Freq Adj and Offset Adj tabs are for utilizing the frequency offset feature of the Si504. Use the Offset
Adj tab to enter an offset in terms of PPM. Use the Freq Adj tab to enter an offset in terms of desired
frequency.
4
Rev. 0.1