|
SI826X Datasheet, PDF (39/40 Pages) Silicon image – 5 KV LED EMULATOR INPUT, 4.0 A ISOLATED GATE DRIVERS | |||
|
◁ |
DOCUMENT CHANGE LIST
Revision 0.9 to Revision 1.0
ï® Updated Table 2 on page 4.
ï® Added Figure 1 on page 7.
ï® Updated "3.1.Theory of Operation" on page 14.
ï® Updated Figures 11, 12, and 13 on page 16.
ï® Removed â5.5. Parametric Differences between
Si826x and HCPL-0302 and HCPL-3120 Opto
Driversâ.
Revision 1.0 to Revision 1.1
ï® Updated Figure 1 on page 7.
ï® Updated Ordering Guide Table 13 on page 23.
ï¬ï Removed references to moisture sensitivity levels from
table note.
Revision 1.1 to Revision 1.2
ï® Removed âSamplingâ from Ordering Guide Table 13
on page 23.
Revision 1.2 to Revision 1.3
ï® Updated Table 3 on page 9.
ï¬ï Added CQC certificate numbers.
ï® Updated Table 5 on page 10.
ï¬ï Updated Rated Mains Voltage for 1000 VRMS ratings.
ï® Updated Table 6 on page 10.
ï¬ï Removed VIOSM specification.
ï® Updated Table 9 on page 13.
ï¬ï Replaced IO with Peak Output Current IOPK.
ï® Updated Figure 14 on page 17.
ï® Updated Figure 15 on page 17.
ï® Updated Figure 16 on page 18.
ï® Changed VDD minimum throughout document to
reflect 6.5 V, not 5 V, as normal operation.
Si826x
Rev. 1.3
39
|
▷ |