English
Language : 

EFR32MG12P432F Datasheet, PDF (30/181 Pages) Silicon Laboratories – EFR32MG12 Mighty Gecko Multi-Protocol Wireless SoC Family Data Sheet
EFR32MG12 Mighty Gecko Multi-Protocol Wireless SoC Family Data Sheet
Electrical Specifications
4.1.5.2 Current Consumption 3.3 V using DC-DC Converter
Unless otherwise indicated, typical conditions are: VREGVDD = AVDD = IOVDD = 3.3 V, DVDD = RFVDD = PAVDD = 1.8 V DC-DC
output. T = 25 °C. Minimum and maximum values in this table represent the worst conditions across supply voltage and process varia-
tion at T = 25 °C.
Table 4.6. Current Consumption 3.3 V using DC-DC Converter
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
Current consumption in EM0 IACTIVE_DCM
38.4 MHz crystal, CPU running
—
88
—
μA/MHz
mode with all peripherals dis-
while loop from flash4
abled, DCDC in Low Noise
DCM mode2
38 MHz HFRCO, CPU running
—
70
—
μA/MHz
Prime from flash
38 MHz HFRCO, CPU running
—
70
—
μA/MHz
while loop from flash
38 MHz HFRCO, CPU running
—
85
—
μA/MHz
CoreMark from flash
26 MHz HFRCO, CPU running
—
77
—
μA/MHz
while loop from flash
1 MHz HFRCO, CPU running
while loop from flash
—
636
—
μA/MHz
Current consumption in EM0 IACTIVE_CCM
38.4 MHz crystal, CPU running
—
98
—
μA/MHz
mode with all peripherals dis-
while loop from flash4
abled, DCDC in Low Noise
CCM mode1
38 MHz HFRCO, CPU running
—
81
—
μA/MHz
Prime from flash
38 MHz HFRCO, CPU running
—
82
—
μA/MHz
while loop from flash
38 MHz HFRCO, CPU running
—
95
—
μA/MHz
CoreMark from flash
26 MHz HFRCO, CPU running
—
95
—
μA/MHz
while loop from flash
1 MHz HFRCO, CPU running
while loop from flash
—
1155
—
μA/MHz
Current consumption in EM0 IACTIVE_CCM_VS
mode with all peripherals dis-
abled and voltage scaling
enabled, DCDC in Low
Noise CCM mode1
19 MHz HFRCO, CPU running
while loop from flash
1 MHz HFRCO, CPU running
while loop from flash
—
101
—
μA/MHz
—
1128
—
μA/MHz
Current consumption in EM1 IEM1_DCM
mode with all peripherals dis-
abled, DCDC in Low Noise
DCM mode2
38.4 MHz crystal4
38 MHz HFRCO
26 MHz HFRCO
—
59
—
μA/MHz
—
41
—
μA/MHz
—
48
—
μA/MHz
1 MHz HFRCO
—
610
—
μA/MHz
Current consumption in EM1 IEM1_DCM_VS
mode with all peripherals dis-
abled and voltage scaling
enabled, DCDC in Low
Noise DCM mode2
19 MHz HFRCO
1 MHz HFRCO
—
52
—
μA/MHz
—
587
—
μA/MHz
silabs.com | Building a more connected world.
Rev. 1.0 | 25