English
Language : 

SI5XX-PROG-EVB Datasheet, PDF (2/20 Pages) Silicon Laboratories – Windows-compatible software control and device programming
1. Introduction
This document describes the operation of the Silicon Laboratories Si514/570/571/598/599 evaluation kit. The
Si5xx-PROG-EVB kit refers to the evaluation board hardware and software intended for customer evaluation of the
Si514/570/571/598/599 Any-Frequency I2C programmable XO/VCXO. The Si5xx-EVB kit contains the following:
 Si5xx-PROG-EVB Hardware
 Programmable Oscillator Software
 EVB Driver (USBXpress®)
The software components run on a USB-equipped PC and are described in detail in Section “5. Software Guide”
The Si5xx-PROG-EVB evaluation board can be used to evaluate the Si514, Si570, Si571, Si598, and Si599 I2C
programmable XOs or VCXOs as shown in Table 1. The Si514-PROG-EVB evaluation board can be used to
evaluate the Si514 I2C-programmable XO as shown in Table 1. This evaluation board functions and performs
similar to the Si5xx-PROG-EVB evaluation board.
Table 1. Si5xx XO and VCXO Device Evaluation Board Selector Guide
Ordering Part #
Type
Devices
Supported
Packages
Supported
Output Format, Supported
Temp Stability, Frequency
Tuning Slope
Range
Si5xx-EVB
Single/Dual Frequency Si510/511 5 x 7 mm, 6-pin
Any
100 kHz to
XO/VCXO Eval Board Si512/513 3.2 x 5 mm, 6-pin
1417 MHz
Si515/516 3.2 x 5 mm, 4-pin
Si530/531
Si532/533
Si550/552
Si590/591
Si5xx-PROG-EVB I2C Programmable
XO/VCXO Eval Board
Si514
Si570/571
Si598/599
5 x 7 mm, 8-pin
5 x 7 mm 6-pin
3.2 x 5 mm, 6-pin
Any
100 kHz to
1417 MHz
Si514-PROG-EVB I2C Programmable XO
Eval Board with sol-
dered Si514
Si514
5 x 7 mm 6-pin
Any
100 kHz to
250 MHz
Si5xx5x7-EVB
Quad Frequency XO/
VCXO Eval Board
Si570-PROG-EVB
I2C Programmable
XO Eval Board with
soldered Si570
Si534
Si554
Si570
5 x 7 mm, 8-pin
5x7 mm 8-pin
Any
10 to
1417 MHz
Any
10 to
1417 MHz
Notes:
1. Si5xx samples must be ordered separately from the Si5xx-PROG-EVB.
2. Board must be modified to be consistent with the ordered part. See "3.10. Output Terminations" on page 8.
3. Si514-PROG-EVB comes with an Si514 preinstalled.
2
Rev. 0.3