SI1062-A-GM Datasheet, PDF (143/358 Pages) Silicon Laboratories – MCU with Integrated 240–960 MHz EZRadioPRO® Transceiver

Si106x/108x
SFR Definition 11.3. EIE1: Extended Interrupt Enable 1
Bit
7
Name ^ET3
Type
R/W
Reset
0
6
ECP1
R/W
0
5
ECP0
R/W
0
4
EPCA0
R/W
0
3
EADC0
R/W
0
2
EWADC0
R/W
0
1
ERTC0A
R/W
0
0
ESMB0
R/W
0
SFR Page = All Pages; SFR Address = 0xE6
Bit Name
Function
7
ET3 Enable Timer 3 Interrupt.
This bit sets the masking of the Timer 3 interrupt.
0: Disable Timer 3 interrupts.
1: Enable interrupt requests generated by the TF3L or TF3H flags.
6 ECP1 Enable Comparator1 (CP1) Interrupt.
This bit sets the masking of the CP1 interrupt.
0: Disable CP1 interrupts.
1: Enable interrupt requests generated by the CP1RIF or CP1FIF flags.
5 ECP0 Enable Comparator0 (CP0) Interrupt.
This bit sets the masking of the CP0 interrupt.
0: Disable CP0 interrupts.
1: Enable interrupt requests generated by the CP0RIF or CP0FIF flags.
4 EPCA0 Enable Programmable Counter Array (PCA0) Interrupt.
This bit sets the masking of the PCA0 interrupts.
0: Disable all PCA0 interrupts.
1: Enable interrupt requests generated by PCA0.
3 EADC0 Enable ADC0 Conversion Complete Interrupt.
This bit sets the masking of the ADC0 Conversion Complete interrupt.
0: Disable ADC0 Conversion Complete interrupt.
1: Enable interrupt requests generated by the AD0INT flag.
2 EWADC0 Enable Window Comparison ADC0 Interrupt.
This bit sets the masking of ADC0 Window Comparison interrupt.
0: Disable ADC0 Window Comparison interrupt.
1: Enable interrupt requests generated by ADC0 Window Compare flag (AD0WINT).
1 ERTC0A Enable SmaRTClock Alarm Interrupts.
This bit sets the masking of the SmaRTClock Alarm interrupt.
0: Disable SmaRTClock Alarm interrupts.
1: Enable interrupt requests generated by a SmaRTClock Alarm.
0 ESMB0 Enable SMBus (SMB0) Interrupt.
This bit sets the masking of the SMB0 interrupt.
0: Disable all SMB0 interrupts.
1: Enable interrupt requests generated by SMB0.
Rev. 1.0
143