EFR32FG1P132F64 Datasheet, PDF (14/101 Pages) Silicon Laboratories – EFR32FG1 Flex Gecko Proprietary Protocol SoC Family Data Sheet

EFR32FG1 Flex Gecko Proprietary Protocol SoCFamily Data Sheet
Electrical Specifications
4.1.1 Absolute Maximum Ratings
Stresses above those listed below may cause permanent damage to the device. This is a stress rating only and functional operation of
the devices at those or any other conditions above those indicated in the operation listings of this specification is not implied. Exposure
to maximum rating conditions for extended periods may affect device reliability. For more information on the available quality and relia-
bility data, see the Quality and Reliability Monitor Report at http://www.silabs.com/support/quality/pages/default.aspx.
Table 4.1. Absolute Maximum Ratings
Parameter
Symbol
Storage temperature range T_STG
External main supply voltage V_DDMAX
External main supply voltage V_DDRAMPMAX
ramp rate
Voltage on any 5V tolerant
GPIO pin¹
V_DIGPIN
Test Condition
Min
Typ
-50
—
0
—
—
—
-0.3
—
Voltage on non-5V tolerant
GPIO pins
-0.3
—
Voltage on HFXO pins
V_HFXOPIN
-0.3
—
Input RF level on pins
2G4RF_IOP and
2G4RF_ION
P_RFMAX2G4
—
—
Voltage differential between
RF pins (2G4RF_IOP -
2G4RF_ION)
V_MAX2G4
-50
—
Absolute Voltage on RF pins V_MAXDIFF2G4
2G4RF_IOP and
2G4RF_ION
-0.3
—
Total current into V_SS ground I_VSSMAX
lines (sink)
—
—
Current per I/O pin (sink)
Current per I/O pin (source)
I_IOMAX
—
—
—
—
Current for all I/O pins (sink)
Current for all I/O pins
(source)
I_IOALLMAX
—
—
—
—
Voltage difference between ΔV_DD
AVDD and VREGVDD
—
—
Note:
1. When a GPIO pin is routed to the analog module through the APORT, the maximum voltage = IOVDD.
Max
Unit
150
°C
3.8
V
1
V / μs
Min of 5.25 V
and IOVDD
+2
IOVDD+0.3 V
1.4
V
10
dBm
50
mV
3.3
V
200
mA
50
mA
50
mA
200
mA
200
mA
0.3
V
silabs.com | Smart. Connected. Energy-friendly.
Preliminary Rev. 0.9 | 13