EFR32BG12 Datasheet, PDF (115/181 Pages) –

EFR32BG12 Blue Gecko Bluetooth ^®Low Energy SoC Family Data Sheet
Typical Connection Diagrams
5.2 RF Matching Networks
Typical RF matching network circuit diagrams are shown in Figure 5.4 Typical 2.4 GHz RF impedance-matching network circuits on
page 110 for applications in the 2.4GHz band, and in Figure 5.5 Typical Sub-GHz RF impedance-matching network circuits on page
111 for applications in the sub-GHz band. Application-specific component values can be found in the EFR32 Reference Manual. For
low RF transmit power applications less than 13dBm, the two-element match is recommended. For OPNs supporting high power RF
transmission, the four-element match is recommended for high RF transmit power (> 13dBm).
Typical RF matching network circuit diagrams are shown in Figure 5.5 Typical Sub-GHz RF impedance-matching network circuits on
page 111 for applications in the sub-GHz band. Application-specific component values can be found in the EFR32 Reference Manual.
For low RF transmit power applications less than 13dBm, the two-element match is recommended. For OPNs supporting high power
RF transmission, the four-element match is recommended for high RF transmit power (> 13dBm).
2-Element Match for 2.4GHz Band
PAVDD
PAVDD
2G4RF_IOP
2G4RF_ION
L0
50Ω
C0
4-Element Match for 2.4GHz Band
PAVDD
PAVDD
2G4RF_IOP
2G4RF_ION
L0
L1
50Ω
C0
C1
Figure 5.4. Typical 2.4 GHz RF impedance-matching network circuits
silabs.com | Building a more connected world.
Rev. 1.0 | 110