|
SI5342-EVB Datasheet, PDF (1/18 Pages) Silicon Laboratories – Powered from USB port or external power supply | |||
|
Si5342-EVB
Si5342 EVALUATION BOARD USERâS GUIDE
Description
EVB Features
The Si5342-EVB is used for evaluating the Si5342
Any-Frequency, Any-Output, Jitter-Attenuating Clock
Multiplier. The Si5342 combines 4th generation DSPLL
and Multisynthï¤ technologies to enable any-frequency
clock generation for applications that require the highest
level of jitter performance. The Si5342-EVB can be
controlled and configured using the ClockBuilder Proï¤
(CB Proï¤) software tool.
ï® Powered from USB port or external power supply.
ï® Onboard 48 MHz XTAL or Reference SMA Inputs
allow holdover mode of operation on the Si5342.
ï® CBProï¤ GUI programmable VDD supply allows
device to operate from 3.3, 2.5, or 1.8 V.
ï® CBProï¤ GUI programmable VDDO supplies allow
each of the 4 outputs to have its own power supply
voltage selectable from 3.3, 2.5, or 1.8 V.
ï® CBProï¤ GUI allows control and measurement of
voltage, current, and power of VDD and all 4 VDDO
supplies.
ï® Status LEDs for power supplies and control/status
signals of Si5342.
ï® SMA connectors for input clocks, output clocks, and
optional external timing reference clock.
Rev. 1.0 5/15
Figure 1. Si5342 Evaluation Board
Copyright © 2015 by Silicon Laboratories
Si5342-EVB
|
▷ |