SI21662-B22 Datasheet, PDF (1/2 Pages) Silicon Laboratories – Dual DVB-S/S2 Digital TV Demodulator

Si21662-B22
Dual DVB-S/S2 Digital TV Demodulator
Description
The Si21662-B integrates two separate high performance
DVB-S, DVB-S2 and DSS digital demodulators into a single
compact package for satellite TV standards. Leveraging
Silicon Labs' proven digital demodulation architecture, each
embedded demodulator achieves excellent reception
performance for each standard while significantly minimizing
front-end design complexity and cost. Connecting the
Si21662-B to a dual satellite tuner, results in a
high-performance and cost optimized TV front-end solution.
The satellite demodulation functionality allows demodulating
widely deployed DVB-S, DIRECTV™ (DSS) legacy
standards, and DVB-S2 (AMC compliant) satellite broadcasts.
A zero-IF interface allows for a seamless connection to
market proven satellite silicon tuners.
Constant Coding Modulation (CCM), QPSK/8PSK
demodulation schemes and broadcast profile are the main
specifications of the DVB-S2 demodulator. Silicon Labs'
innovative LDPC and BCH decoding architecture delivers
best-in-class reception while exhibiting low power dissipation.
The Si21662-B offers an on-chip blind scanning algorithm for
DVB-S/S2 standards. It also integrates two DiSEqC™ 2.0
LNB interfaces for satellite dish control and, for each satellite
demodulator, an equalizer to compensate for echoes in long
cable feeds from the LNB to the satellite tuner RF input.
The Si21662-B embeds two independent programmable
transport stream interfaces which provide a flexible range of
output modes and are fully compatible with all MPEG
decoders or conditional access modules to support any
customer application.
Features
- DVB-S2 (ETSI EN 302 307 and TR102-376)
- QPSK/8PSK demodulator and FEC decoder
- Broadcast profile CCM, 64800 bits frame, single TS
- 1 to 45 MSymbol/s
- DIRECTV^TM AMC compatible
- DVB-S (ETSI EN 300 421) and DSS supported
- QPSK demodulator and enhanced FEC decoder
- 1 to 45 MSymbol/s
- Dual DiSEqC™ 2.x interface, Unicable support
- I²C serial bus interfaces (master and host)
- Dual independent differential ZIF I/Q inputs
- GPIOs and multi-purpose ports (two per demodulator)
- Firmware control for upgradeability
- Separate flexible TS interfaces with serial or parallel 
outputs
- Fast lock times for all standards
- Only two power supplies: 1.2 and 3.3 V
- 8x8 mm, QFN-68 pin package, Pb-free/RoHS compliant
- Pin-to-pin compatible with all dual demodulator family:
Si216x2
- API compatible with all single and dual demodulator 
families
Applications
- Multi-receiver iDTV: on-board or in a NIM
- Advanced multimedia PVR STBs
- PC-TV accessories
- PVR, DVD, and Blu-Ray disc recorders
Dual Satellite
Tuner
MP_A_A
MP_C_A
S_ADC_IP_A
S_ADC_IN_A
S_ADC_QP_A
S_ADC_QN_A
ADC_A
ADC_A
DiSEqC_OUT_A
DiSEqC_CMD
DiSEqC_IN_A_B
SDA_MAST
SCL_MAST
XO
XTAL_I/CLK_IN
CLK_IN/OUT
DiSEqC_OUT_B
DiSEqC_A
DiSEqC_B
S_ADC_IP_B
S_ADC_IN_B
S_ADC_QP_B
S_ADC_QN_B
MP_B_B
MP_D_B
ADC_B
ADC_B
1.2, 3.3V RESETB
Si21662B
DEMODULATOR_A CORE
I2C Block_A
GPIO1/TS_ERR_A
TS_VAL_A
TS_SYNC_A
TS_CLK_A
TS_DATA_A
8
ADDR_A
SDA_HOST
SCL_HOST
I2C Block_B
DEMODULATOR_B CORE
ADDR_B
GPIO0/TS_ERR_B
TS_VAL_B
TS_SYNC_B
TS_CLK_B
TS_DATA_B
8
Dual Digital Demodulators
Copyright © 2015 by Silicon Laboratories
10.29.2015