ISL8216M Datasheet, PDF (1/29 Pages) Intersil Corporation – Complete switch mode power supply in one package

Complete High Voltage 80V, 4A DC/DC Power Module
ISL8216M
The ISL8216M is a simple and easy to use, high voltage DC/DC
module and is ideal for a wide variety of applications. It
eliminates design and manufacturing risks while dramatically
improving time to market.
The simplicity is in the "Off-The-Shelf" unassisted
implementation. All you need is the ISL8216M, input and
output capacitors, and one resistor to program the output
voltage and you have a complete high voltage power design
ready for the market.
The ISL8216M is packaged in a thermally enhanced, compact
(15mm×15mm×3.6mm) over-molded High-Density Array
(HDA) Package, which permits full load operation without heat
sink or fans. The package is suitable for automated assembly
by standard surface mount equipment. The small amount of
external components reduce the PCB to a component layer
and a simple ground layer.
Related Literature
• AN1907 “ISL8216MEVAL1Z Evaluation Board User’s Guide”
Features
• Complete switch mode power supply in one package
• Wide input voltage range: 10V to 80V
• Output current 4A
• Programmable soft-start
• Compliant with EN 55022 Class B (see AN1907)
• SYNC and adjustable frequency 200kHz to 600kHz
• Single resistor sets V_OUT +2.5V up to +30V
• Setpoint accuracy ±1.5%
• Programmable overcurrent protection
• RoHS compliant with exemption
• Small footprint, low profile (15mm×15mm×3.6mm)
Applications
• Servers
• 48V telecom and datacom applications
• 12V and 42V automotive and industrial equipment
• Distributed power converters and point-of-load (POL)
regulation
• General purpose step-down DC/DC
NOTE: ALL PINS NOT SHOWN ARE FLOATING
FIGURE 1. TYPICAL APPLICATION CIRCUIT
3.6mm
15mm
FIGURE 2. SMALL FOOTPRINT PACKAGE WITH LOW PROFILE (3.6mm)
May 9, 2014
1
FN8607.2
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2014. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.