EL8202 Datasheet, PDF (1/16 Pages) Intersil Corporation – Pb-free plus anneal available

EL8202, EL8203, EL8403
NOc1NTo-8nOR8t_{DaE8Rac-CEIttNa}^OCoTMO_{SuErhMMRTeMESee}^NIEc_{tLhDNonEDriDcEwaDFlwOSRwRuE.ipPnNpLtEeoArWrsCt iCElD.ceMEonSEmtINeG/rTtNsacStApril 26, 2006}
FN7106.2
500MHz Rail-to-Rail Amplifiers
The EL8202, EL8203, and EL8403 represent rail-to-rail
amplifiers with a -3dB bandwidth of 500MHz and slew rate of
600V/µs. Running off a very low supply current of 5.6mA per
channel, the EL8202, EL8203, and EL8403 also feature
inputs that go to 0.15V below the V_S- rail. The EL8202 and
EL8203 are dual channel amplifiers. The EL8403 is a quad
channel amplifier.
The EL8202 includes a fast-acting disable/power-down
circuit. With a 25ns disable and a 200ns enable, the EL8202
is ideal for multiplexing applications.
The EL8202, EL8203, and EL8403 are designed for a
number of general purpose video, communication,
instrumentation, and industrial applications. The EL8202 is
available in a 10 Ld MSOP package, the EL8203 in 8 Ld SO
and 8 Ld MSOP packages, and the EL8403 in 14 Ld SO and
16 Ld QSOP packages. All are specified for operation over
the -40°C to +85°C temperature range.
Features
• 500MHz -3dB bandwidth
• 600V/µs slew rate
• Low supply current = 5.6mA per channel
• Supplies from 3V to 5.5V
• Rail-to-rail output
• Input to 0.15V below V_S-
• Fast 25ns disable (EL8202 only)
• Low cost
• Pb-free plus anneal available (RoHS compliant)
Applications
• Video amplifiers
• Portable/hand-held products
• Communications devices
Ordering Information
PART
NUMBER
PART TAPE &
PKG.
MARKING REEL PACKAGE DWG. #
EL8202IY
m
- 10 Ld MSOP MDP0043
EL8202IY-T7 m
7” 10 Ld MSOP MDP0043
EL8202IY-T13 m
13” 10 Ld MSOP MDP0043
EL8202IYZ
(See Note)
BAPAA
- 10 Ld MSOP MDP0043
(Pb-free)
EL8202IYZ-T7 BAPAA
(See Note)
7” 10 Ld MSOP MDP0043
(Pb-free)
EL8202IYZ-T13 BAPAA
(See Note)
13” 10 Ld MSOP MDP0043
(Pb-free)
EL8203IS
8203IS
- 8 Ld SO
MDP0027
EL8203IS-T7 8203IS
7” 8 Ld SO
MDP0027
EL8203IS-T13 8203IS
13” 8 Ld SO
MDP0027
EL8203ISZ
(See Note)
8203ISZ
- 8 Ld SO
(Pb-free)
MDP0027
EL8203ISZ-T7 8203ISZ
(See Note)
7” 8 Ld SO
(Pb-free)
MDP0027
EL8203ISZ-T13 8203ISZ
(See Note)
13” 8 Ld SO
(Pb-free)
MDP0027
EL8203IY
BJAAA
- 8 Ld MSOP MDP0043
EL8203IY-T7 BJAAA
7” 8 Ld MSOP MDP0043
EL8203IY-T13 BJAAA
13” 8 Ld MSOP MDP0043
Ordering Information (Continued)
PART
NUMBER
PART TAPE &
PKG.
MARKING REEL PACKAGE DWG. #
EL8403IS
8403IS
- 14 Ld SO MDP0027
EL8403IS-T7 8403IS
7” 14 Ld SO MDP0027
EL8403IS-T13 8403IS
13” 14 Ld SO MDP0027
EL8403ISZ
(See Note)
8403ISZ
- 14 Ld SO
(Pb-free)
MDP0027
EL8403ISZ-T7 8403ISZ
(See Note)
7” 14 Ld SO
(Pb-free)
MDP0027
EL8403ISZ-T13 8403ISZ
(See Note)
13” 14 Ld SO
(Pb-free)
MDP0027
EL8403IU
8403IU
- 16 Ld QSOP MDP0040
EL8403IU-T7 8403IU
7” 16 Ld QSOP MDP0040
EL8403IU-T13 8403IU
13” 16 Ld QSOP MDP0040
EL8403IUZ
(See Note)
8403IUZ
- 16 Ld QSOP MDP0040
(Pb-free)
EL8403IUZ-T7 8403IUZ
(See Note)
7” 16 Ld QSOP MDP0040
(Pb-free)
EL8403IUZ-T13 8403IUZ
(See Note)
13” 16 Ld QSOP MDP0040
(Pb-free)
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100% matte
tin plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003, 2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.