|
AN670 Datasheet, PDF (1/24 Pages) Silicon Laboratories – GETTING STARTED WITH THE SILICON LABS PRECISION32™ APPBUILDER | |||
|
AN670
GETTING STARTED WITH THE SILICON LABS
PRECISION32⢠APPBUILDER
1. Introduction
Precision32⢠AppBuilder is a software program that generates configuration code for MCU devices. The software
dynamically generates configuration code for peripherals, clocks, and pins in user-definable modes, greatly
simplifying the device initialization process. This application note overviews the AppBuilder software for the Silicon
Labs 32-bit microcontrollers.
Figure 1. Precision32 AppBuilder
2. Key Points
ï®ï Creating and navigating a new project
ï®ï Configuring peripherals, clocks, pins, and modes
ï®ï Exporting a project
3. Relevant Documentation
Precision32 Application Notes are listed on the following website: www.silabs.com/32bit-mcu.
ï®ï AN663: Precision32⢠MCU Family Clocking Options
ï®ï AN664: Precision32⢠CMSIS and HAL Userâs Guide
ï®ï AN667: Getting Started with the Silicon Labs Precision32⢠IDE
ï®ï AN671: Precision32⢠Port I/O Crossbar Decoder
Rev. 0.2 9/12
Copyright © 2012 by Silicon Laboratories
AN670
|
▷ |