|
AN667 Datasheet, PDF (1/22 Pages) Silicon Laboratories – GETTING STARTED WITH THE SILICON LABS PRECISION32™ IDE | |||
|
AN667
GETTING STARTED WITH THE SILICON LABS
PRECISION32⢠IDE
1. Introduction
This application note describes the Precision32⢠Integrated Development Environment (IDE) for the Silicon Labs
32-bit microcontrollers (SiM3xxxx). This IDE is based on the Eclipse platform.
2. Key Points
ï®ï Importing and building projects with the Precision32 IDE
ï®ï IDE Overview
ï®ï Debugging with the Precision32 IDE
ï®ï Getting Started: Blinky Example
3. Relevant Documentation
ï®ï Precision32 Help: In the Precision32 IDE, go to Helpï®Help Contents
ï®ï Eclipse documentation: http://help.eclipse.org/indigo/index.jsp
4. Hardware Requirements
The Precision32 IDE has the following hardware requirements:
ï®ï A standard x86 PC with 1 GB RAM minimum (2 GB recommended) and 500 MB+ of available disk space,
running one of the following operating systems (both 32-bit and 64-bit systems are supported):
ï¬ï Microsoft® Windows XP (SP2 or greater)
ï¬ï Microsoft® Windows Vista
ï¬ï Microsoft® Windows 7
An internet connection is required to request and activate license keys.
Rev. 0.1 2/12
Copyright © 2012 by Silicon Laboratories
AN667
|
▷ |