1607271 Datasheet, PDF (1/1 Pages) Silicon Laboratories – This change is considered a minor change which does not affect form, fit, function, quality, or reliability

Bulletin #1607271
_____________________________________________________________________________________________________
User Registration
Register today to create your account on Silabs.com. Your personalized profile allows you to receive
technical document updates, new product announcements, “how-to” and design documents, product
change notices (PCN) and other valuable content available only to registered users.
http://www.silabs.com/profile
Bulletin Date: 7/27/2016
Bulletin Effective Date: 7/27/2016
Title: Si7050/1/3/4/5 Data Sheet update from rev 1.13 to rev 1.14
Bulletin Details
Description:
The Si7050/1/3/4/5 data sheet was updated from Revision 1.13 to Revision 1.14. The following changes
were made:
Updated “No Hold Master Mode” diagram in "5.1. Issuing a Measurement Command" on page 13.
Updated diagram in "5.4. Firmware Revision" on page 16.
Updated notes in Table 14, “PCB Land Pattern Dimensions,” on page 21 to remove unnecessary
recommendation about a need for no clean solder paste.
Reason:
Correcting minor errors found in data sheet.
Product Identification:
Si7050-A20-IM, Si7050-A20-IMR
Si7051-A20-IM, Si7051-A20-IMR
Si7053-A20-IM, Si7053-A20-IMR
Si7054-A20-IM, Si7054-A20-IMR
Si7055-A20-IM, Si7055-A20-IMR
Si7055-A20-ZM, Si7055-A20-ZMR
This change is considered a minor change which does not affect form, fit, function, quality, or reliability.
The information is being provided as a customer courtesy.
Please contact your local Silicon Labs sales representative with any questions about this notification. A
list of Silicon Labs sales representatives may be found at www.silabs.com
Customer Actions Needed:
Review Document Change List on page 25 of the data sheet.
W7206F2 Silicon Labs Bulletin rev Q
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in part or whole
without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 3