S-5813A Datasheet, PDF (9/18 Pages) Seiko Instruments Inc – CMOS TEMPERATURE SENSOR IC

Rev.1.2_00
CMOS TEMPERATURE SENSOR IC
S-5813A/5814A Series
3. Nonlinearity (ΔN_L)
ΔN_L indicates the nonlinearity of the output voltage and is defined as the difference of the characteristic curve of the output
voltage and the approximation line shown below.
ΔN_L is calculated using the following formula.
ΔNL
=
a^*1
b^*2
× 100
Output voltage (VOUT)
a
V_OUT (at Ta = −20°C)
a
(B) Actual measurement
of output voltage
b
a
(A) Approximation line
V_OUT (at Ta = 80°C)
−20°C 0°C
Temperature (Ta)
80°C
*1. The maximum deviation of the actual measurement of output voltage (B) and an approximation line (A) in
temperature within −20°C to 80°C. The approximation line is the line drawn so that “a” should be the minimum
value.
*2. The difference of the output voltage within −20°C to 80°C.
Figure 7
4. Line regulation (ΔV_OUT1)
ΔV_OUT1 indicates the output voltage dependency of the input voltage. That is, the values express how the output voltage
changes, when input voltage is changed under the condition that output current is fixed.
5. Load regulation (ΔV_OUT2)
ΔV_OUT2 indicates the output voltage dependency of the output current. That is, the values express how the output
voltage changes, when output current is changed under the condition that input voltage is fixed.
Seiko Instruments Inc.
9