S-8365 Datasheet, PDF (26/63 Pages) Seiko Instruments Inc – STEP-UP, SUPER-SMALL PACKAGE, 1.2 MHz PWM CONTROL or PWM/PFM SWITCHABLE SWITCHING REGULATOR CONTROLLER

STEP-UP, SUPER-SMALL PACKAGE, 1.2 MHz PWM CONTROL or PWM/PFM SWITCHABLE SWITCHING REGULATOR CONTROLLER
S-8365/8366 Series
Rev.1.1_00
„ Application Circuits
Application circuits are examples. They may always not guarantee successful operation.
1. External parts for application circuits
Part
Inductor
Diode
Transistor
Capacitor
* 1. DCR :
* 2. I_MAX :
* 3. V_F :
* 4. I_F :
* 5. V_R :
* 6. V_DSS :
* 7. V_GSS :
* 8. I_D :
* 9. Q_G :
*10. R_{DS(ON )}:
*11. V_GS :
*12. V_CEO :
*13. V_EBO :
*14. I_C :
*15. h_FE :
*16. E_DC :
26
Table 16 Characteristics of External Parts
Part Name
NR6028T-2R2M
LTF5022T-3R3M
VLF3010ST-2R2M
VLF3010ST-3R3M
RB070M-30TR
RB050LA-30
Si2312BDS
2SD2652
JMK107BJ106MA-T
LMK212BJ106KD-T
EMK316BJ106KF-T
TMK325B7106MN-T
C2012X5R1A106KT
C1005X7R1C104KT
GRM31CR71A106KA
Manfuacturer
Taiyo Yuden Co., Ltd.
TDK Corporation
Rohm Co., Ltd.
VISHAY
INTERTECHNOLOGY,
INC.
Rohm Co., Ltd.
Taiyo Yuden Co., Ltd.
TDK Corporation
Murata Manufacturing,
Co., Ltd.
Characteristics
2.2 µH, DCR^*1 = 0.020 Ω, I_MAX^*2 = 4.2 A,
L × W × H = 6.0 × 6.0 × 2.8 mm
3.3 µH, DCR^*1 = 0.060 Ω, I_MAX^*2 = 2.7 A,
L × W × H = 5.0 × 5.2 × 2.2 mm
2.2 µH, DCR^*1 = 0.114 Ω, I_MAX^*2 = 1.1 A,
L × W × H = 3.0 × 3.0 × 1.0 mm
3.3 µH, DCR^*1 = 0.168 Ω, I_MAX^*2 = 0.87 A,
L × W × H = 3.0 × 3.0 × 1.0 mm
V_F^*3 = 0.44 V, I_F^*4 = 1.5 A, V_R^*5 = 30 V
L × W × H = 3.5 × 1.6 × 0.9 mm
V_F^*3 = 0.45 V, I_F^*4 = 3.0 A, V_R^*5 = 30 V
L × W × H = 4.7 × 2.6 × 1.05 mm
V_DSS^*6 = 20 V, V_GSS^*7 = ±8 V, I_D^*8 = 5.0 A,
Q_G^*9 = 12 nC max.
R_DS(ON)^*10 = 0.047 Ω max. (V_GS^*11 = 2.5 V)
L × W × H = 2.9 × 2.64 × 1.12 mm
V_CEO^*12 = 12 V, V_EBO^*13 = 6 V, I_C^*14 = 1.5 A,
h_FE^*15 = 270 min./680 max. (V_CE/I_C = 2 V/200 mA)
L × W × H = 2.0 × 1.25 × 0.9 mm
10 µF, E_DC^*16 = 6.3 V, X5R,
L × W × H = 1.6 × 0.8 × 0.95 mm
10 µF, E_DC^*16 = 10 V, X5R,
L × W × H = 2.0 × 1.25 × 0.95 mm
10 µF, E_DC^*16 = 16 V, X5R,
L × W × H = 3.2 × 1.6 × 1.25 mm
10 µF, E_DC^*16 = 25 V, X7R,
L × W × H = 3.2 × 2.5 × 2.1 mm
10 µF, E_DC^*16 = 10 V, X5R,
L × W × H = 2.0 × 1.25 × 1.45 mm
0.1 µF, E_DC^*16 = 16 V, X7R,
L × W × H = 1.0 × 0.5 × 0.55 mm
10 µF, E_DC^*16 = 10 V, X7R,
L × W × H = 3.2 × 1.6 × 1.6 mm
DC resistance
Maximum allowable current
Forward voltage
Forward current
Reverse voltage
Drain-source voltage (during short-circuiting between the gate and source)
Gate-source voltage (during short-circuiting between the drain and source)
Drain current
Gate charge
On-resistance between the drain and source
Gate-source voltage
Collector-emitter voltage
Emitter-base voltage
Collector current
Direct current gain
Rated voltage
Seiko Instruments Inc.