S25A010 Datasheet, PDF (25/35 Pages) Seiko Instruments Inc – FOR AUTOMOTIVE 125C OPERATION

Rev.5.2_00
125°C OPERATION SPI SERIAL E²PROM FOR AUTOMOTIVE
S-25A010A/020A/040A
SI, WP, HOLD
2. 2 Output pin
Figure 25 SI, _WP , _HOLD Pin
VCC
SO
Figure 26 SO Pin
 Precautions
• Absolute maximum ratings: Do not operate these ICs in excess of the absolute maximum ratings (as listed on the
data sheet). Exceeding the supply voltage rating can cause latch-up.
• Operations with moisture on this IC's pins may occur malfunction by short-circuit between pins. Especially, in
occasions like picking this IC up from low temperature tank during the evaluation. Be sure that not remain frost on this
IC's pins to prevent malfunction by short-circuit.
Also attention should be paid in using on environment, which is easy to dew for the same reason.
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
• SII claims no responsibility for any and all disputes arising out of or in connection with any infringement of the products
including this IC upon patents owned by a third party.
Seiko Instruments Inc.
25