S-8205AAA-TCT1U Datasheet, PDF (25/33 Pages) Seiko Instruments Inc – BATTERY PROTECTION IC

Rev.1.9_00
BATTERY PROTECTION IC FOR 4-SERIES OR 5-SERIES CELL PACK
S-8205A/B Series
 Precautions
• The application conditions for the input voltage, output voltage, and load current should not exceed the package
power dissipation.
• Batteries can be connected in any order, however, there may be cases when discharging cannot be performed when
a battery is connected. In this case, short the VM pin and VSS pin or connect the battery charger to return to the
normal mode.
• If both an overcharge battery and an overdischarge battery are included among the whole batteries, the condition is
set in overcharge status and overdischarge status. Therefore either charging or discharging is impossible.
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
• SII Semiconductor Corporation claims no responsibility for any disputes arising out of or in connection with any
infringement by products including this IC of patents owned by a third party.
25