S-8130AA Datasheet, PDF (2/12 Pages) Seiko Instruments Inc – TEMPERATURE SWITCH IC WITH LATCH

TEMPERATURE SWITCH IC WITH LATCH
S-8130AA Series
„ Block diagram
S-8130AAXFN-XXXT2G (Fixed detection temperature)
VDD
Temparature
+
Sensor
-
Vref
RESET
Voltage detector
with delay circuit
Rev.2.2_00
VOUT RT
Vref
Reference
voltage source
CD1
DQ
D-F/F
CKR
DET
CD2
„ Selection Guide
VSS
Figure 1
Product name
S - 8130 A A X F N - X X X T 2 G
IC direction in tape specifications
Abbreviated Code
Option code
Option list
• Detection temperature T_DET is selectable in 5°C step in the range between 60 and 95°C.
• DET output is selectable active high or active low.
• Release voltage V_RET is selectable in 0.1 V step in the range between 2.2 and 3.4 V.
• RESET pin is selectable “PuII-up” or “Nch Open Drain”.
Table 1
Product name
T_DET
DET output
V_RET
RESET
S-8130AAAFN-MAAT2G
80°C
Active high
2.4 V
Pull-up
S-8130AACFN-MAET2G
86°C
Active high
2.9 V
Pull-up
Remark Please contact our sales department for options other than those specified above.
2
Seiko Instruments Inc.