S-58LM20A Datasheet, PDF (13/27 Pages) Seiko Instruments Inc – CMOS TEMPERATURE SENSOR IC

Rev.1.2_00
CMOS TEMPERATURE SENSOR IC
S-58LM20A Series
• For stabilization, set a capacitor (C_IN) of approx. 0.1 µF between VDD and VSS pin.
• Do not connect a pull-up resistor to the output pin.
• The application condition for input voltage, output voltage and load voltage must not exceed the package power
dissipation.
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
• Regarding the current at the output pin, refer to load regulation and footnote *1 in Table 6 “„ Electrical Characteristics”.
• SII claims no responsibility for any disputes arising out of or in connection with any infringement by products including this
IC of patents owned by a third party.
Seiko Instruments Inc.
13