S-5741NBL0B-M3T4U Datasheet, PDF (13/19 Pages) Seiko Instruments Inc – HIGH-WITHSTAND VOLTAGE HIGH-SPEED

125°C OPERATION HIGH-WITHSTAND VOLTAGE HIGH-SPEED BIPOLAR HALL EFFECT LATCH IC
Rev.1.0_00
S-5741 B Series
 Precautions
• If the impedance of the power supply is high, the IC may malfunction due to a supply voltage drop caused by feed-
through current. Take care with the pattern wiring to ensure that the impedance of the power supply is low.
• Note that the IC may malfunction if the power supply voltage rapidly changes. When the IC is used under the
environment where the power supply voltage rapidly changes, it is recommended to judge the output voltage of the IC
by reading it multiple times.
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
• Although this IC has a built-in output current limit circuit, it may suffer physical damage such as product deterioration
under the environment where the absolute maximum ratings are exceeded.
• The application conditions for the power supply voltage, the pull-up voltage, and the pull-up resistor should not exceed
the power dissipation.
• Large stress on this IC may affect on the magnetic characteristics. Avoid large stress which is caused by the handling
during or after mounting the IC on a board.
• SII Semiconductor Corporation claims no responsibility for any disputes arising out of or in connection with any
infringement by products including this IC of patents owned by a third party.
13