|
S-5717ANDL8-I4T1U Datasheet, PDF (13/19 Pages) Seiko Instruments Inc – UNIPOLAR DETECTION TYPE HALL IC | |||
|
◁ |
LOW VOLTAGE OPERATION BOTH POLES / UNIPOLAR DETECTION TYPE HALL IC
Rev.1.0_01
S-5717 Series
ï® Precautions
⢠If the impedance of the power supply is high, the IC may malfunction due to a supply voltage drop caused by feed-
through current. Take care with the pattern wiring to ensure that the impedance of the power supply is low.
⢠Note that the IC may malfunction if the power supply voltage rapidly changes.
⢠Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
⢠Large stress on this IC may affect on the magnetic characteristics. Avoid large stress which is caused by bend and
distortion during mounting the IC on a board or handle after mounting.
⢠SII Semiconductor Corporation claims no responsibility for any disputes arising out of or in connection with any
infringement by products including this IC of patents owned by a third party.
13
|
▷ |