S1132 Datasheet, PDF (11/35 Pages) Seiko Instruments Inc – HIGH RIPPLE-REJECTION AND LOW DROPOUT

HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.4.2_00
S-1132 Series
 Explanation of Terms
1. Low dropout voltage regulator
This voltage regulator has the low dropout voltage due to its built-in low on-resistance transistor.
2. Low ESR
A capacitor whose ESR (Equivalent Series Resistance) is low. The S-1132 Series enables use of a low ESR
capacitor, such as a ceramic capacitor, for the output capacitor (C_L). A capacitor whose ESR is 2.0 Ω or less can be
used.
3. Output voltage (V_OUT)
The accuracy of the output voltage is ensured at ±1.0% under the specified conditions of fixed input voltage^*1, fixed
output current, and fixed temperature.
*1. Differs depending on the product.
Caution If the above conditions change, the output voltage value may vary and exceed the accuracy range of
the output voltage. Refer to “ Electrical Characteristics” and “ Characteristics (Typical Data)” for
details.
4.
Line regulation
 ^ΔVOUT1
ΔV_IN • V_OUT


Indicates the dependency of the output voltage on the input voltage. That is, the values show how much the output
voltage changes due to a change in the input voltage with the output current remaining unchanged.
5. Load regulation (ΔV_OUT2)
Indicates the dependency of the output voltage on the output current. That is, the values show how much the output
voltage changes due to a change in the output current with the input voltage remaining unchanged.
6. Dropout voltage (V_drop)
Indicates the difference between input voltage (V_IN1) and the output voltage when; decreasing input voltage (V_IN)
gradually until the output voltage has dropped out to the value of 98% of output voltage (V_OUT3), which is at V_IN =
V_OUT(S) + 1.0 V.
V_drop = V_IN1 − (V_OUT3 × 0.98)
Seiko Instruments Inc.
11