S-89530A Datasheet, PDF (10/16 Pages) Seiko Instruments Inc – MINI ANALOG SERIES 0.7 μA Rail-to-Rail CMOS COMPARATOR

MINI ANALOG SERIES 0.7 μA Rail-to-Rail CMOS COMPARATOR
S-89530A/89531A
Rev.3.1_00
8. Propagation delay time/transient response time
IN(⁺)
t_PLH, t_PHL
Input rise/fall time: 20 ns
IN(^−) ⁼ V_DD/2
IN(⁺)
V_OUT
100 mV
100 mV
t _TLH
V_{OH =} V_{DD × 0.9}
V_OUT
V_OL ⁼ V_DD × 0.1
t_THL
Figure 14
„ Cautions
y When R_L = 100 kΩ, V_OH may rise only 0.65 V if the temperature is −40°C and V_DD = 0.9 V.
If the temperature is −20°C, however, V_OH rises to 0.8 V, which is 100 mV below V_DD, when V_DD = 0.9 V,
even if R_L = 100 kΩ.
If V_DD is 1.2 V, V_OH rises to 0.88 V, which is 20 mV below V_DD when R_L = 100 kΩ, even at −40°C.
The temperature characteristics data described above can be used as reference data. Note that 100%
testing under these conditions has not been performed.
y Be sure to use the product with a source current of no more than 7 mA.
y Do not apply an electrostatic discharge to this IC that exceeds the performance ratings ofthe built-in
electrostatic protection circuit.
10
Seiko Instruments Inc.