|
S8244 Datasheet, PDF (1/32 Pages) Seiko Instruments Inc – BATTERY PROTECTION IC FOR 1-SERIAL TO 4-SERIAL-CELL PACK | |||
|
S-8244 Series
www.sii-ic.com
© Seiko Instruments Inc., 2003-2015
BATTERY PROTECTION IC FOR 1-SERIAL TO 4-SERIAL-CELL PACK
(SECONDARY PROTECTION)
Rev.6.4_00
The S-8244 Series is used for secondary protection of lithium-ion batteries with from one to four cells, and incorporates a
high-precision voltage detector circuit and a delay circuit. Short-circuiting between cells makes it possible for serial
connection of one to four cells.
ï® Features
(1) Internal high-precision voltage detector circuit
⢠Overcharge detection voltage range : 3.700 V to 4.550 V : Accuracy of ± 25 mV (at +25°C)
(at a 5 mV/step) Accuracy of ± 50 mV (at â40°C to +85°C)
⢠Hysteresis :
5 types
0.38 ± 0.1 V, 0.25 ± 0.07 V, 0.13 ± 0.04 V, 0.045 ± 0.02 V, None
(2) High withstand voltage device :
Absolute maximum rating : 26 V
(3) Wide operating voltage range :
3.6 V to 24 V (refers to the range in which the delay circuit can operate
normally after overvoltage is detected)
(4) Delay time during detection :
Can be set by an external capacitor.
(5) Low current consumption :
At 3.5 V for each cell : 3.0 μA max. (+25°C)
At 2.3 V for each cell : 2.4 μA max. (+25°C)
(6) Output logic and form :
5 types
CMOS output active âHâ
CMOS output active âLâ
Pch open drain output active âLâ
Nch open drain output active âHâ
Nch open drain output active âLâ
(7) Lead-free, Sn 100%, halogen-free*1
(CMOS / Nch open drain output for 0.045 V hysteresis models)
*1. Refer to âï® Product Name Structureâ for details.
ï® Applications
⢠Lithium ion rechargeable battery packs (secondary protection)
ï® Packages
⢠SNT-8A
⢠8-Pin MSOP
⢠TMSOP-8
Seiko Instruments Inc.
1
|
▷ |