|
S19190 Datasheet, PDF (1/25 Pages) Seiko Instruments Inc – FOR AUTOMOTIVE OPERATION VOLTAGE MONITORING IC WITH CELL BALANCING FUNCTION | |||
|
S-19190 Series
www.sii-ic.com
FOR AUTOMOTIVE 105°C OPERATION
VOLTAGE MONITORING IC WITH CELL BALANCING FUNCTION
© SII Semiconductor Corporation, 2015-2017
Rev.1.5_00
The S-19190 Series is a voltage monitoring IC with a cell balancing function and includes a high-accuracy voltage
detection circuit and a delay circuit.
The S-19190 Series is suitable for cell balancing and overcharge protection of batteries and capacitors.
Caution This product can be used in vehicle equipment and in-vehicle equipment. Before using the product
in the purpose, contact to SII Semiconductor Corporation is indispensable.
ï® Features
⢠High-accuracy voltage detection circuit
Cell balancing detection voltage: 2.0 V to 4.6 V (5 mV step)
Accuracy ±12 mV (2.0 V ⤠VBU < 2.4 V)
Cell balancing release voltage: 2.0 V to 4.6 V*1
Accuracy ±0.5% (2.4 V ⤠VBU ⤠4.6 V)
Accuracy ±24 mV (2.0 V ⤠VBL < 2.4 V)
Accuracy ±1.0% (2.4 V ⤠VBL ⤠4.6 V)
Overcharge detection voltage: 2.0 V to 4.6 V (5 mV step)
Accuracy ±12 mV (2.0 V ⤠VCU < 2.4 V)
Overcharge release voltage:
2.0 V to 4.6 V*2
Accuracy ±0.5% (2.4 V ⤠VCU ⤠4.6 V)
Accuracy ±24 mV (2.0 V ⤠VCL < 2.4 V)
Accuracy ±1.0% (2.4 V ⤠VCL ⤠4.6 V)
⢠Built-in Nch transistor with ON resistance of 5 Ω typ. between the CB pin and the VSS pin
⢠Current consumption:
2.0 μA max. (Ta = +25°C)
⢠Delay times are generated only by an internal circuit (External capacitors are unnecessary).
⢠CO pin output form and output logic are selectable: CMOS output
Active "H", active "L"
_____ Nch open-drain output Active "H", active "L"
⢠Switchable to power-saving mode by using the CE pin
⢠Operation temperature range:
Ta = â40°C to +105°C
⢠Lead-free (Sn 100%), halogen-free
⢠AEC-Q100 qualified*3
*1. Cell balancing release voltage = Cell balancing detection voltage â Cell balancing hysteresis voltage
(Cell balancing hysteresis voltage can be selected as 0 V or from a range of 0.1 V to 0.7 V in 50 mV step.)
*2. Overcharge release voltage = Overcharge detection voltage â Overcharge hysteresis voltage
(Overcharge hysteresis voltage can be selected as 0 V or from a range of 0.1 V to 0.7 V in 50 mV step.)
*3. Contact our sales office for details.
ï® Applications
⢠Rechargeable battery module
⢠Capacitor module
ï® Package
⢠SOT-23-6
1
|
▷ |