S-93C86B Datasheet, PDF (1/34 Pages) Seiko Instruments Inc – CMOS SERIAL E2PROM

Rev.2.2_00
CMOS SERIAL E²PROM
S-93C86B
The S-93C86B is a high speed, low current
consumption, 16 K-bit serial E²PROM with a wide
operating voltage range. It is organized as 1024-word
× 16-bit, respectively. This product is capable of
sequential read, at which time addresses are
automatically incremented in 16-bit blocks. The
instruction code is compatible with the NM93CS86.
„ Features
• Low current consumption
Standby: 1.5 µA Max. (V_CC = 5.5 V, at −40 to +85°C)
Operating: 0.8 mA Max. (V_CC = 5.5 V)
0.4 mA Max. (V_CC = 2.5 V)
• Wide operating voltage range Read:
1.8 to 5.5 V (at −40 to +85°C)
Write:
2.7 to 5.5 V (at −40 to +85°C)
• Sequential read capable
• Write disable function when power supply voltage is low
• Function to protect against write due to erroneous instruction recognition
• Endurance:
10⁷ cycles/word^*1 (at +25°C) write capable,
10⁶ cycles/word^*1 (at +85°C)
3 × 10⁵ cycles/word^*1 (at +105°C)
• Data retention:
*1. For each address (Word: 16 bits)
10 years (after rewriting 10⁶ cycles/word at +85°C)
• S-93C86B:
16 K-bit NM93CS86 instruction code compatible
• High-temperature operation: +105°C Max. supported
(Only S-93C86BD4H-J8T2G and S-93C86BD4H-T8T2G)
• Write time:
4.0 ms Max.
• Lead-free products
„ Packages
Package name
8-Pin SOP(JEDEC)
8-Pin TSSOP
Package
FJ008-A
FT008-A
Drawing code
Tape
FJ008-D
FT008-E
Reel
FJ008-D
FT008-E
Caution This product is intended to use in general electronic devices such as consumer electronics,
office equipment, and communications devices. Before using the product in medical
equipment or automobile equipment including car audio, keyless entry and engine control
unit, contact to SII is indispensable.
Seiko Instruments Inc.
1