S-8254AANFT-TB-G Datasheet, PDF (1/29 Pages) Seiko Instruments Inc – BATTERY PROTECTION IC FOR 3-SERIAL- OR 4-SERIAL-CELL PACK

S-8254A Series
www.sii-ic.com
© Seiko Instruments Inc., 2002-2010
BATTERY PROTECTION IC
FOR 3-SERIAL- OR 4-SERIAL-CELL PACK
Rev.5.0_01
The S-8254A series is a protection IC for 3-serial- or 4-serial-cell lithium-ion / lithium polymer rechargeable
batteries and includes a high-accuracy voltage detector and delay circuit.
The S-8254A series protects both 3-serial or 4-serial cells using the SEL pin for switching.
„ Features
(1) High-accuracy voltage detection for each cell
• Overcharge detection voltage n (n = 1 to 4)
• Overcharge release voltage n (n = 1 to 4)
3.9 V to 4.4 V (50 mV steps) Accuracy ±25 mV
3.8 V to 4.4 V^*1
Accuracy ±50 mV
• Overdischarge detection voltage n (n = 1 to 4) 2.0 V to 3.0 V (100 mV steps) Accuracy ±80 mV
• Overdischarge release voltage n (n = 1 to 4) 2.0 V to 3.4 V^*2
Accuracy ±100 mV
(2) Three-level overcurrent protection
• Overcurrent detection voltage 1
0.05 V to 0.30 V (50 mV steps) Accuracy ±25 mV
• Overcurrent detection voltage 2
0.5 V
Accuracy ±100 mV
• Overcurrent detection voltage 3
V_VC1 − 1.2 V
Accuracy ±300 mV
(3) Delay times for overcharge detection, overdischarge detection and overcurrent detection 1 can be set
by external capacitors (delay times for overcurrent detection 2 and 3 are fixed internally).
(4) Switchable between a 3-serial cell and 4-serial cell using the SEL pin
(5) Charge/discharge operation can be controlled via the control pins.
(6) High-withstand voltage device
Absolute maximum rating : 26 V
(7) Wide operating voltage range
2 V to 24 V
(8) Wide operating temperature range −40°C to + 85°C
(9) Low current consumption
• Operation mode 30 μA max. (+25°C)
• Power-down mode 0.1 μA max. (+25°C)
(10) Lead-free, Sn100%, halogen-free^*3
*1. Overcharge hysteresis voltage n (n = 1 to 4) can be selected as 0 V or from a range of 0.1 V to 0.4 V in
50 mV steps.
(Overcharge hysteresis voltage = Overcharge detection voltage − Overcharge release voltage)
*2. Overdischarge hysteresis voltage n (n = 1 to 4) can be selected as 0 V or from a range of 0.2 V to 0.7 V
in 100 mV steps.
(Overdischarge hysteresis voltage = Overdischarge release voltage − Overdischarge detection voltage)
*3. Refer to “„ Product Name Structure” for details.
„ Applications
• Lithium-ion rechargeable battery packs
• Lithium polymer rechargeable battery packs
„ Package
• 16-Pin TSSOP
Seiko Instruments Inc.
1