S-8241 Datasheet, PDF (1/38 Pages) Seiko Instruments Inc – BATTERY PROTECTION IC FOR 1-CELL PACK

Rev.7.6_00
BATTERY PROTECTION IC
FOR 1-CELL PACK
S-8241 Series
„ Features
The S-8241 Series is a series of lithium ion/lithium polymer rechargeable battery
protection ICs incorporating high-accuracy voltage detection circuits and delay
circuits.
These ICs are suitable for protection of 1-cell lithium ion/lithium polymer battery
packs from overcharge, overdischarge and overcurrent.
(1) Internal high-accuracy voltage detection circuit
• Overcharge detection voltage: 3.9 to 4.4 V (5 mV-step)
• Overcharge release voltage:
Accuracy of ±25 mV(+25 °C) and ± 30 mV(−5 to +55 °C)
3.8 to 4.4 V ^*1 Accuracy of ±50 mV
• Overdischarge detection voltage: 2.0 to 3.0 V (100 mV-step) Accuracy of ±80 mV
• Overdischarge release voltage: 2.0 to 3.4 V ^*2 Accuracy of ±100 mV
• Overcurrent 1 detection voltage: 0.05 to 0.3 V (5 mV-step) Accuracy of ±20 mV
• Overcurrent 2 detection voltage: 0.5 V (fixed) Accuracy of ±100 mV
(2) A high voltage withstand device is used for charger connection pins
(VM and CO pins: Absolute maximum rating = 26 V)
(3) Delay times (overcharge: t_CU; overdischarge: t_DL; overcurrent 1: t_lOV1; overcurrent 2: t_lOV2) are generated
by an internal circuit. (External capacitors are unnecessary.) Accuracy of ±30%
(4) Internal three-step overcurrent detection circuit (overcurrent 1, overcurrent 2, and load short-circuiting)
(5) Either the 0 V battery charging function or 0 V battery charge inhibiting function can be selected.
(6) Products with and without a power-down function can be selected.
(7) Charger detection function and abnormal charge current detection function
• The overdischarge hysterisis is released by detecting a negative VM pin voltage (typ. −1.3 V) (Charger detection
function).
• If the output voltage at DO pin is high and the VM pin voltage becomes equal to or lower than the charger detection
voltage (typ. −1.3 V), the output voltage at CO pin goes low (Abnormal charge current detection function).
(8) Low current consumption
• Operation:
3.0 μA typ. 5.0 μA max.
• Power-down mode: 0.1 μA max.
(9) Wide operating temperature range: −40 to +85 °C
(10) Small package SOT-23-5, SNT-6A
(11) Lead-free products
*1. Overcharge release voltage = Overcharge detection voltage - Overcharge hysteresis
The overcharge hysteresis can be selected in the range 0.0, or 0.1 to 0.4 V in 50 mV steps. (However, selection
“Overcharge release voltage<3.8 V” is enabled.)
*2. Overdischarge release voltage = Overdischarge detection voltage + Overdischarge hysteresis
The overdischarge hysteresis can be selected in the range 0.0 to 0.7 V in 100 mV steps. (However, selection
“Overdischarge release voltage>3.4 V” is enabled.)
„ Applications
• Lithium-ion rechargeable battery packs
• Lithium- polymer rechargeable battery packs
„ Packages
Package name
SOT-23-5
SNT-6A
Package
MP005-A
PG006-A
Drawing code
Tape
Reel
MP005-A
MP005-A
PG006-A
PG006-A
Land
⎯
PG006-A
Seiko Instruments Inc.
1