|
S-7760A Datasheet, PDF (1/53 Pages) Seiko Instruments Inc – PROGRAMMABLE PORT CONTROLLER (PORT EXPANDER WITH BUILT-IN E2PROM CIRCUIT) | |||
|
Rev.1.3_00
PROGRAMMABLE PORT CONTROLLER
(PORT EXPANDER WITH BUILT-IN E2PROM CIRCUIT)
S-7760A
The S-7760A is a programmable port controller IC comprised of an
E2PROM, a control circuit for data output, a circuit to prevent
malfunction caused by low power supply voltage and others.
This IC operates at 400 kHz and interfaces with exteriors via
I2C-bus, controls an 8ch digital output with a serial signal.
Among the digital output ports of 8 channels, the lower 4 channels
have a timer function so that at each port, users are able to set the
default value and inverted delay time. In the higher 4 channels,
setting the fixed output is available at each port. The default value
is maintained despite power-off because this IC has an E2PROM.
The S-7760A is able to be used to control ON/OFF for the chips
surrounding MPU and to output the default data that devices
fundamentally have.
 Features
⢠Operating voltage range:
2.3 to 4.5 V
⢠8ch digital output:
⢠Operating frequency of I2C-bus interface:
Higher 4 channels; fixed output/lower 4 channels; timer action
400 kHz
⢠Low current consumption at standby:
3.0 µA Max. (VCCH = 4.5 V CMOS input type)
⢠Built-in E2PROM circuit:
⢠E2PROM endurance:
⢠E2PROM data retention:
⢠Function to protect write in E2PROM
10.0 µA Max. (VCCH = 4.5 V low voltage input type)
6-byte
105 cycles / word*1 (at â40 to +85 °C)
10 years (after rewriting 105 cycles / word)
⢠Function to prevent malfunction during low power supply voltage operation
⢠Lead-free product
⢠Small package:
WLP-16A, 16-Pin TSSOP (Under development)
*1. For each address (Word: 8 bits)
 Application
⢠Mobile phone
⢠Portable communication device
⢠Digital still camera
⢠Digital video camera
 Package
Package Name
WLP-16A
16-Pin TSSOP*1
*1. Under development
Package
HA016-A
FT016-A
Drawing Code
Tape
HA016-A
FT016-A
Reel
HA016-A
FT016-A
Seiko Instruments Inc.
1
|
▷ |