S-24CM01C Datasheet, PDF (1/32 Pages) Seiko Instruments Inc – Write protect function during the low power supply voltage

S-24CM01C
www.sii-ic.com
© SII Semiconductor Corporation, 2010-2013
2-WIRE SERIAL E²PROM
Rev.2.0_02_S
The S-24CM01C is a 2-wire, low current consumption and wide range operation serial E²PROM. The S-24CM01C has the
capacity of 1 M-bit, and the organization is 131072 words × 8-bit. Page write and sequential read are available.
 Features
• Operating voltage range
Read:
1.6 V to 5.5 V
Write:
1.7 V to 5.5 V
• Page write:
256 bytes / page
• Sequential read
• Operation frequency:
1.0 MHz (VCC = 2.5 V to 5.5 V)
400 kHz (VCC = 1.6 V to 2.5 V)
• Write time:
5.0 ms max.
• Noise suppression:
Schmitt trigger and noise filter on input pins (SCL, SDA)
• Write protect function during the low power supply voltage
• Endurance:
10⁶cycles / unit^*1 (Ta = +25°C)
• Data retention:
100 years (Ta = +25°C)
• Memory capacity:
1 M-bit
• Write protect:
100%
• Initial shipment data:
FFh
• Lead-free (Sn 100%), halogen-free^*2
*1. For each unit (unit: the 4 bytes with the same address of P0, W15 to W2)
*2. Refer to “ Product Name Structure” for details.
 Package
• 8-Pin SOP (JEDEC)
Caution
This product is intended to use in general electronic devices such as consumer electronics,
office equipment, and communications devices. Before using the product in medical equipment
or automobile equipment including car audio, keyless entry and engine control unit, contact to
SII Semiconductor Corporation is indispensable.
1