S-24C512C Datasheet, PDF (1/35 Pages) Seiko Instruments Inc – Write protect function during the low power supply voltage

S-24C512C
www.sii-ic.com
© SII Semiconductor Corporation, 2010-2013
2-WIRE SERIAL E²PROM
Rev.2.0_02_S
The S-24C512C is a 2-wire, low current consumption and wide range operation serial E²PROM. The S-24C512C has the
capacity of 512 K-bit, and the organization is 65536 words × 8-bit. Page write and sequential read are available.
 Features
• Operating voltage range
Read:
1.6 V to 5.5 V
Write:
1.7 V to 5.5 V
• Page write:
128 bytes / page
• Sequential read
• Operation frequency:
1.0 MHz (VCC = 2.5 V to 5.5 V)
400 kHz (VCC = 1.6 V to 2.5 V)
• Write time:
5.0 ms max.
• Noise suppression:
Schmitt trigger and noise filter on input pins (SCL, SDA)
• Write protect function during the low power supply voltage
• Endurance:
10⁶ cycles / unit^*1 (Ta = +25°C)
• Data retention:
100 years (Ta = +25°C)
• Memory capacity:
512 K-bit
• Write protect:
100%
• Initial shipment data:
FFh
• Lead-free (Sn 100%), halogen-free^*2
*1. For each unit (unit: the 4 bytes with the same address of W15 to W2)
*2. Refer to “ Product Name Structure” for details.
 Packages
• 8-Pin SOP (JEDEC)
• 8-Pin TSSOP
Caution
This product is intended to use in general electronic devices such as consumer electronics,
office equipment, and communications devices. Before using the product in medical equipment
or automobile equipment including car audio, keyless entry and engine control unit, contact to
SII Semiconductor Corporation is indispensable.
1