S-19311BF2A-V5T2U4 Datasheet, PDF (1/39 Pages) Seiko Instruments Inc – CMOS VOLTAGE REGULATOR WITH RESET FUNCTION

S-19311 Series
FOR AUTOMOTIVE 125°C OPERATION HIGH-WITHSTAND VOLTAGE
www.sii-ic.com
CMOS VOLTAGE REGULATOR WITH RESET FUNCTION
© SII Semiconductor Corporation, 2015
Rev.1.0_02
The S-19311 Series, developed by using high-withstand voltage CMOS technology, is a positive voltage regulator with the
reset function, which has high-withstand voltage and high-accuracy output voltage. This IC has a built-in low on-resistance
output transistor which provides a small dropout voltage and a large output current. Also, a built-in overcurrent protection
circuit to limit overcurrent of the output transistor and a built-in thermal shutdown circuit to limit heat are included.
High heat radiation TO-252-5S(A) and HSOP-8A packages enable high-density mounting.
Caution This product can be used in vehicle equipment and in-vehicle equipment. Before using the product in
the purpose, contact to SII Semiconductor Corporation is indispensable.
 Features
Regulator block
• Output voltage:
• Input voltage:
• Output voltage accuracy:
• Dropout voltage:
• Output current:
• Input and output capacitors:
• Ripple rejection:
• Built-in overcurrent protection circuit:
• Built-in thermal shutdown circuit:
3.0 V to 5.3 V, selectable in 0.1 V step
4.0 V to 36.0 V
±2.0% (Tj = −40°C to +150°C)
120 mV typ. (5.0 V output product, IOUT = 100 mA)
Possible to output 200 mA (VIN = VOUT(S) + 1.0 V)^*1
A ceramic capacitor of 2.2 μF or more can be used.
70 dB typ. (f = 100 Hz)
Limits overcurrent of output transistor.
Detection temperature 170°C typ.
Detector block
• Detection voltage:
• Detection voltage accuracy:
• Hysteresis width:
• Release delay time:
• Output form:
2.6 V to 5.0 V, selectable in 0.1 V step
±100 mV (Tj = −40°C to +150°C)
0.12 V min.
18 ms typ. (CDLY = 47 nF)
Nch open-drain output (Built-in pull-up resistor)
Overall
• Current consumption:
• Operation temperature range:
• Lead-free (Sn 100%), halogen-free
• Withstand 45 V load dump
• AEC-Q100 in process^*2
During operation: 60 μA typ., 95 μA max. (Tj = −40°C to +150°C)
Ta = −40°C to +125°C
*1. Please make sure that the loss of the IC will not exceed the power dissipation when the output current is large.
*2. Contact our sales office for details.
 Applications
• Constant-voltage power supply and reset circuit for automotive electric component
• For automotive use (engine, transmission, suspension, ABS, related-devices for EV / HEV / PHEV, etc.)
 Packages
• TO-252-5S(A)
• HSOP-8A
1