SE2522L Datasheet, PDF (1/8 Pages) SiGe Semiconductor, Inc. – RangeCharger™ 2.4 GHz Power Amplifier And Power Detector IC Preliminary Information

SE2522L
RangeCharger™ 2.4 GHz Power Amplifier And Power Detector IC
Preliminary Information
Applications
IEEE 802.11b DSSS radios, Wireless LAN
2.4GHz cordless phones, ISM radios
Features
Integrated power detector circuit
High linear output power for IEEE802.11b:
+20dBm, ACPR 1^st lobe –30dBc, 2^nd lobe –50dBc
Low current consumption: 110mA at 3.3V
High saturated output power for cordless telephone
applications: +23dBm, 140mA at 3.6V
Single supply voltage: 2.7 to 3.6V
Wide Temperature range: -40°C to +85°C
Integrated linear analog control for DC current and
output power management
Small plastic package: 8 Pin LPCC
Ordering Information
Type
SE2522L
SE2522L-R
Package
8 Pin LPCC
8 Pin LPCC
SE2522L-EK1
Evaluation Kit
Remark
Samples
Shipped in
Tape & Reel
Functional Block Diagram
Product Description
The SE2522L is a power amplifier IC designed for the
2.4GHz ISM band and compliant with the IEEE 802.11b
WLAN standard. It typically provides +20dBm linear
output power requiring only 110mA at 3.3V. It can also
be utilized in 2.4GHz cordless telephone applications
where it typically provides +23dBm saturated output
power at 3.6V.
The SE2522 includes an integrated power detector
circuit for closed loop monitoring of output power. It has
an input power range of 15dB with an accuracy of
±1.0dB. An accurate automatic level control function
can easily be implemented using this power detector
circuit.
The SE2522L contains a linear analog control (0.1 to
1.6V) for minimizing DC current consumption and
maximizing PAE.
The SE2522L includes a digital enable control for
device on/off control where ramping is typically 1 µsec.
This device is capable of operating at a duty cycle of
100 percent.
V_CTL V_CC0
V_EN
Bias Generator
IN
Stage 1
GND
V_CC1
Stage 2
OUT/ V_CC2
Power Detector
V_DET
18-DST-01 Rev 2.4 Aug 7/02
1 of 8