SE2520L Datasheet, PDF (1/8 Pages) SiGe Semiconductor, Inc. – RangeCharger 2.4GHz Power Amplifier IC Final

SE2520L
RangeCharger™ 2.4GHz Power Amplifier IC
Final
Applications
IEEE 802.11b DSSS Radios, Wireless LAN
2.4GHz Cordless Phones, ISM Radios
Bluetooth™ Wireless Technology
Features
High linear output power for IEEE802.11b,
+20dBm, ACPR 1^st lobe –30dBc, 2^nd lobe –50dBc
Low current consumption: 110mA at 3.3V
High saturated output power for cordless
telephone applications: +23dBm, 140mA at 3.6V
Single supply voltage: 2.7 to 3.6V
Wide Temperature range: -40 to +85°C
Integrated linear analog control for DC current
and output power management
Small plastic package, 6 Pin LPCC
Product Description
The SE2520L is a power amplifier IC designed for the
2.4GHz ISM band and compliant with the IEEE
802.11b WLAN standard, providing up to +20dBm
typical output power at 3.3V with ACPR of –30dBc 1^st
lobe and –50dBc 2^nd lobe, and requiring only 110mA.
For 2.4GHz cordless telephone applications, the
SE2520L produces +23dBm typical saturated output
power at 3.6V.
The SE2520L contains a linear analog control (0.1 to
1.6V) for controlling DC current and output power.
The SE2520L includes a digital enable control for
device on/off control. Ramping is 1 µsec typical.
This device is capable of operating at a duty cycle of
100 percent.
Ordering Information
Type
SE2520L
SE2520L-R
Package
6 Pin LPCC ⁽¹⁾
6 Pin LPCC ⁽¹⁾
SE2520L-EK1
SE2520L-EK3
Evaluation Kit
Evaluation Kit
Notes: (1) JEDEC QFN package.
Functional Block Diagram
Remark
Samples
Shipped in
Tape & Reel
Standard
Power Detect,
Filter, Rx/Tx
and Diversity
Switches
V_CTL
V_CC0
V_EN
Bias Generator
IN
Stage 1
GND
Interstage
Match
V_CC1
Stage 2
OUT/V_CC2
GND
15-DST-01 Rev 4.8 Oct 28/02
1 of 8