BTS612N1 Datasheet, PDF (6/14 Pages) Siemens Semiconductor Group – Smart Two Channel Highside Power Switch (Overload protection Current limitation Short circuit protection Thermal shutdown)

Parameter and Conditions, each channel
at Tj = 25 °C, V_bb = 12 V unless otherwise specified
Symbol
Input and Status Feedback¹⁰⁾
Input resistance
R_I
T_j=-40..150°C, see circuit page 8
Input turn-on threshold voltage T_j =-40..+150°C: V_IN(T+)
Input turn-off threshold voltage T_j =-40..+150°C: V_IN(T-)
Input threshold hysteresis
∆ V_IN(T)
Off state input current (pin 3 or 6), V_IN = 0.4 V,
T_j =-40..+150°C
I_IN(off)
On state input current (pin 3 or 6), V_IN = 3.5 V,
T_j =-40..+150°C
I_IN(on)
Delay time for status with open load
after Input neg. slope (see diagram page 12)
t_{d(ST OL3)}
Status output (open drain)
Zener limit voltage T_j =-40...+150°C, I_ST = +1.6 mA: V_ST(high)
ST low voltage T_j =-40...+25°C, I_ST = +1.6 mA: V_ST(low)
T_j = +150°C, I_ST = +1.6 mA:
BTS 612 N1
Values
Unit
min typ max
2.5 3.5
6 kΩ
1.7
-- 3.5 V
1.5
--
-- V
-- 0.5
-- V
1
-- 50 µA
20 50 90 µA
-- 220
-- µs
5.4 6.1
-- V
--
-- 0.4
--
-- 0.6
10) _{If a ground resistor RGND is used, add the voltage drop across this resistor.}
Semiconductor Group
6