PEB2445 Datasheet, PDF (2/70 Pages) Siemens Semiconductor Group – Multipoint Switching and Conferencing Unit - Attenuation MUSAC-A

PEB 2445
Revision History:
Current Version: 02.96
Previous Version: Digital Switching and Conferencing IC’s Data Book 01.94
Page
(in Version
01.94)
Page
(in new
Version)
Subjects (major changes since last revision)
220
11
Version 1.2
220
11
P-DIP-40 package not further available
224, 227,
243
16, 19, 36 Motorola Mode not available
249
40
Figure (Initializing the … 4096-kHz Device Clock) corrected
–
56
Abs. Max. Ratings: I_LPD defintion
59
t_{WD min.} = 20 ns
59
t_{s min.} = 15 ns
60
t_{SS8 min.} = 20 ns, t_{SH4 max.} = t_CP4 − 10 ns + t_CP4H
–
60
t_{SPL min.} = 100 ns added
–
66
Appendix: Design sheets added
Edition 02.96
This edition was realized using the software system FrameMaker^®.
Published by Siemens AG,
Bereich Halbleiter, Marketing-
Kommunikation, Balanstraße 73,
81541 München
© _{Siemens AG 1996.}
All Rights Reserved.
Attention please!
As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes
and circuits implemented within components or assemblies.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
For questions on technology, delivery and prices please contact the Semiconductor Group Offices in Germany or the Siemens Companies
and Representatives worldwide (see address list).
Due to technical requirements components may contain dangerous substances. For information on the types in question please contact
your nearest Siemens Office, Semiconductor Group.
Siemens AG is an approved CECC manufacturer.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we
will take packing material back, if it is sorted. You must bear the costs of transport.
For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs in-
curred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components¹ of the Semiconductor Group of Siemens AG, may only be used in life-support devices or systems² with the express
written approval of the Semiconductor Group of Siemens AG.
1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the
failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain hu-
man life. If they fail, it is reasonable to assume that the health of the user may be endangered.