|
LSK382 Datasheet, PDF (1/8 Pages) Siemens Semiconductor Group – Super ARGUS LED High-Current, 3 mm T1 LED, Non Diffused | |||
|
Super ARGUS® LED
LS K382, LO K382, LY K382
High-Current, 3 mm (T1) LED, Non Diffused
LG K382, LP K382
Besondere Merkmale
q eingefärbtes, klares Gehäuse
q Kunststoffgehäuse mit spezieller Formgebung
q besonders geeignet bei hohem Umfeldlicht duch erhöhten
Betriebsstrom (typ. 50 mA)
q bei Einsatz eines äuÃeren Reflektors zur Hintergrund-
beleuchtung von Leuchtfeldern und LCD-Anzeigen
geeignet
q gleichmäÃige Ausleuchtung einer Streuscheibe
(WeiÃdruck) vor dem äuÃeren Reflektor
q LötspieÃe mit Aufsetzebene
q gegurtet lieferbar
q Störimpulsfest nach DIN 40839
q Hinweis: Bei farbigen Streuscheiben muà die spektrale
Transmission an die von der LED emittierte Wellenlänge
angepaÃt werden.
Features
q colored, clear package
q plastic package with a special design
q appropriate for high ambient light because of the higher
operating current (typ. 50 mA)
q in connection with an additional, custom built reflector
suitable for backlighting of display panels
q uniform illumination of a diffuser screen in front of the
custom built reflector
q solder leads with stand-off
q available taped on reel
q load dump resistant acc. to DIN 40839
q Note: If the diffuser screen is tinted, the spectral
transmission must be adjusted to the wavelength emitted
by the LED.
Semiconductor Group
1
11.96
|
▷ |