BTS630 Datasheet, PDF (1/8 Pages) Siemens Semiconductor Group – PWM Power Unit (The device allows continuous power control for lamps,LEDs or inductive loads.)

PWM Power Unit
BTS 630
The device allows continuous power control for lamps,LEDs
or inductive loads.
• Highside switch
• Overtemperatur protection
• Short circuit / overload protection through pulse widt
reduction and overload shutdown
• Load dump protection
• Undervoltage and overvoltage shutdown with auto-restart
and hysteresis
• Reverse battery protection 1)
• Timing frequency adjustable
• Controlled switching rise and fall times
• Maximum current internally limited
• Protection against loss of GND 2)
• Electrostatic discharge (ESD) protection
• Package: TO220/7 and TO220/7 E3128 (SMD), Pin 4 is
shorted to the mounting flange
Note: Switching frequency is programmed with an external capacitor.
7
1
Standard
Type
BTS630 (Standard)
BTS630
Ordering Code
Marking
Q67060-S6305-A2
-
Q67060-S6305-A3
-
Package
TO220/7
TO220/7, E3230
Maximum Ratings
Parameter
Active overvoltage prodection
Short circuit current
Input current (DC)
Pin1 (C_t) and pin19 (V_C)
Operating temperature range
Storage temperature range
Power dissipation
T_a=25°C
Thermal resistance chip-case
chip-ambient
Symbol
V_{bb (AZ)}
I_SC
I_Ct
I_VC
T_j
T_stg
P_tot
R_{th JC}
R_{th JA}
Values
Unit
>40
V
self-limited -
2
mA
2
mA
-40...+150 EC
-50...+150
75
W
≤ 1.67
K/W
≤ 75
1) _{With 150Ω resistor in signal GND connection.}
2) _{Potential between signal GND and load GND >0.5V}
Semiconductor Group
1
12.96