B32560 Datasheet, PDF (1/16 Pages) Siemens Semiconductor Group – Metallized Polyester Film Capacitors (MKT) Uncoated (Silver Caps)

Metallized Polyester Film Capacitors (MKT)
Uncoated (Silver Caps)
B 32 560 … B 32 564
Extremely small dimensions
Versions with special dimensions
can be supplied at short notice
Construction
q Dielectric: polyethylene terephthalate
(polyester)
q Stacked-film technology
q Uncoated
Features
q Special dimensions available upon request
q High pulse strength
q Minimum tensile strength of leads >10 N
Typical applications
q Standard applications
q Electronic lamp ballast circuits
q Energy-saving lamps
q Substitute for electrolytics in electronic
lamp ballasts (420 Vdc)
Cut
surfaces
Dimensions in mm
Lead spacing
± 0,4
7,5
10,0
15,0
22,5
27,5
Diameter d₁
0,5
0,5
0,6
0,8
0,8
Type
B 32 560
B 32 561
B 32 562
B 32 563
B 32 564
Terminals
q Parallel wire leads, tinned
q Also available with (3,0 ± 0,5) mm
lead length upon request
Marking
Rated capacitance (coded),
rated dc voltage
Delivery mode
Bulk (untaped)
Taped (AMMO pack or reel) for
lead spacing ≤ 15,0 mm.
For notes on taping, refer to page 279.
Detail specification
Homologated in accordance with CECC 30 401-007
Notes on mounting
When mounting these capacitors, take into account creepage distances and clearances to adjacent
live parts. The insulating strength of the cut surfaces to other live parts of the circuit is 1,5 times the
capacitors rated dc voltage, but is always at least 300 Vdc.
Capacitors with 7,5 mm lead spacing are only suitable for use with single-clad printed circuit boards.
Siemens Matsushita Components
53